[. . . ] safety G G G max 2 G 1 G G G - 220-240V - 120V G G G G G G G G G G G G Your kettle has a dual voltage selector on the underside of the kettle. Always check that you have selected the correct voltage before using the kettle. Avoid contact with steam coming out of the spout area when pouring and out of the lid when refilling. [. . . ] The water level must be between "MAX" and "MIN" (1 cup/approx. To re-boil, wait a few seconds - the on/off switch needs time to reset. G If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see "descaling". If descaling does not solve the problem contact Kenwood customer care. G Take care when using the cups and do not overfill above the inner rim (approx. G Your kettle is fitted with a scale filter to hold back limescale particles. G If you find drops of water under your kettle, don't worry - it is just condensation. G approximate boiling times 220/240 volts approx 5 minutes for 450 mls (maximum) 110/120 volts approx 5 minutes 40 seconds for 450 mls (maximum) care and cleaning G G G G G Before cleaning, unplug your kettle and let it cool down. Even though your kettle comes with a scale filter, you still need to clean the inside (and the filter) regularly. G G G G G G G key lid on/off switch neon light water level gauge scale filter 2 cups 2 spoons dual voltage selector cord clip the scale filter 1 Open the lid. 4 To re-fit the scale filter, slide it in until it rests on the notch under the spout . max max boil-dry protection If you switch on with too little water, your kettle will cut out automatically. When it has cooled down, the switch will reset itself. 2 2 2 descaling Regular descaling of the flat element will improve the performance of your kettle. If the kettle is not descaled regularly the build up of limescale may result in the following: G problems may be experienced with the kettle switching on and off during use or switching off before boiling. G When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. This makes boiled water look cloudy and leaves a deposit on the side of the kettle. G Alternatively, to reduce limescale build up, use filtered water to fill your kettle. [. . . ] Have your model number ready - it is located on the underside of your kettle. guarantee (UK only) If your kettle goes wrong within one year from the date you bought it, we will repair or replace it free of charge provided: you have not misused, neglected or damaged it; it has not been modified (unless by Kenwood); it is not second-hand; it has not been used commercially; you have not fitted a plug incorrectly; and you supply your receipt to show when you bought it. This guarantee does not affect your statutory rights. G G G G G G G G G G ma x 2 1 G G G G G G JK60 series Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK www. kenwood. co. uk 2618/2 [. . . ]